2 in 1: Keysight/Agilent 86100A Infiniium DCA 20 GHz Electrical / 15 GHz Optical Oscilloscope with 86105B Opt. 101
Professional Agilent Infiniium DCA wide-bandwidth oscilloscope with an installed 86105B Option 101 optical/electrical measurement module. Provides a 15 GHz optical channel for 1000–1600 nm single-mode measurements and a 20 GHz electrical channel for high-speed digital communications testing.
1 in stock
Proceed to CheckoutRental option
Rent RequestThe Agilent 86100A Infiniium DCA is a professional wide-bandwidth Digital Communications Analyzer designed for high-speed optical and electrical waveform characterization. The platform supports oscilloscope measurements, eye-diagram analysis, transmitter compliance testing, and TDR/TDT measurement modes when equipped with appropriate modules.
This unit includes an Agilent 86105B Option 101 optical/electrical plug-in module. The 86105B provides a 15 GHz single-mode optical measurement channel covering 1000–1600 nm and a 20 GHz electrical measurement channel with a 3.5 mm 50-ohm input. Option 101 provides reference receiver support for high-speed data rates including 9.953, 10.3125, 10.51875, 10.664, and 10.709 Gb/s.
The system is well suited for optical communications development, 10 Gb/s transmitter characterization, eye-diagram and mask testing, SONET/SDH measurements, 10 Gigabit Ethernet testing, Fibre Channel development, and high-speed electrical signal analysis.
The 86100A supports oscilloscope, eye-diagram/DCA, and TDR/TDT modes, while the 86105B Option 101 supports the listed high-speed reference-receiver rates.
15 GHz optical channel for 9/125 fibers
Wavelength range: 1000-1600 nm
Characteristic rms noise: 5 uW (10 GHz BW), 10 uW (15 GHz BW)
Maximum average input power: 2 mW
Reference receiver capability: see options for supported data rates
20 GHz electrical channel with 3.5 mm male input
Characteristic rms noise: 0.25 mV (12.4 GHz BW), 0.5 mV (20 GHz BW)
Maximum input signal: +/- 2 Vdc
Includes Agilent 86100A Infiniium DCA mainframe and one installed Agilent 86105B Option 101 optical/electrical module. Mainframe serial number: US40170158. The second front module bay is empty. Unit powers on and the display and installed module are shown operating in the photographs. Cosmetic wear consistent with normal laboratory use is visible. No additional modules, cables, optical adapters, keyboard, mouse, or accessories are included unless specifically shown or stated. Any calibration statement refers only to testing specifically performed or documented and should not be interpreted as a current traceable calibration certificate unless such certificate is included.
