Hirox MX-5030RZ II 3D rotary zoom microscope lens designed for high-magnification digital microscopy, industrial inspection, and optical imaging applications. Features 50–300x magnification and rotational viewing capability when used with compatible Hirox equipment.
Lot of 6 Accelink Erbium-Doped Fiber Amplifiers (EDFAs) designed for C-band optical signal amplification in DWDM and fiber-optic communication systems.
Tektronix DSA8300 high-performance digital serial analyzer and equivalent-time sampling oscilloscope featuring 16-bit vertical resolution, 425 fs typical time-base jitter, and support for optical and electrical sampling modules. Fully tested and working properly. Ideal for high-speed serial data, eye-diagram, jitter, and optical communication analysis. Includes a 30-day limited warranty.
ProteinSimple Wes fully automated capillary Western blot system for quantitative protein analysis, supporting up to 25 samples per run, 2–440 kDa molecular-weight coverage, and high-sensitivity chemiluminescent detection. 30-day limited warranty.
JDSU MAP-280 professional 8-slot modular optical test mainframe with integrated controller, Ethernet, GPIB, USB, DVI, and LXI automation support. Ideal for photonics R&D, fiber-optic testing, and telecommunications laboratories.
VIAVI / JDSU MAP-200 Series 8-slot modular optical test system featuring a four-channel tunable laser, dual-channel variable optical attenuator, dual 1×4 optical switch, and two programmable variable optical backreflectors.
JDSU MAP-230B professional modular optical test system featuring a 4-channel C-band tunable laser (mTLG-C1) and dual-channel variable optical attenuator (mVOA-A2). Designed for DWDM systems, photonic integrated circuit characterization, fiber-optic component testing, and advanced optical research. **Fully operational at the system level, with all built-in self-tests passed.** Both optical modules are recognized by the control software. Good pre-owned condition with minor cosmetic scratches. Optional extended testing ($899/module) and professional calibration ($1,899/module) available.
High Resolution Telecentric Lens for Measurement and Gauging Up to 5 MegaPixels, 3.45μm Pixel Size Sensors Up to 2/3", C-Mount Telecentric Lens Magnification from 0.06X to 1X TECHSPEC® GoldTL™ Telecentric Lenses were designed specifically for machine vision and metrology applications. The unique focusable design allows for working distance adjustment, while still providing <0.2° telecentricity. These lenses also feature high resolutions, low distortions, and are available for ½” or 2/3” sensors. TECHSPEC® GoldTL™ Telecentric Lenses have a front filter thread for easy integration of color filters, polarizers or other mounted components. Both the iris and focusing adjustment positions can be fixed by set screws to remain secure in high vibration environments.
he Yokogawa AQ2202 Frame Controller with AQ2200-601 10 Gbit/s BERT Module is a modular high-speed communications test system designed for bit error ratio testing and optical transceiver characterization. The AQ2200-601 integrates a pattern generator, signal generator, error detector, and clock data recovery functionality for testing 10 Gb/s-class digital and optical communication systems, including 10 Gigabit Ethernet, SONET/SDH, Fibre Channel, and OTN applications.
Pre-owned Magna-Power XR50-40 programmable DC power supply. The unit may show cosmetic wear consistent with normal laboratory or industrial use. Functional condition and calibration status have not been independently verified unless specifically stated elsewhere in this listing. Please review all photographs for the exact condition and configuration. The Magna-Power XR50-40 is a professional 2 kW programmable DC power supply providing 0–50 VDC output at up to 40 A. It is part of Magna-Power’s XR Series of rack-mount programmable power supplies and is designed for laboratory, manufacturing, semiconductor, automotive, battery, aerospace, power-electronics, and automated test applications. The platform supports constant-voltage and constant-current operation, remote sensing, programmable protection, SCPI control, analog programming, and automated test integration.
The HORIBA Jobin Yvon Syncerity is a scientific thermoelectrically cooled CCD detection camera designed for spectroscopic measurements and low-light optical detection. The Syncerity platform is intended for use with HORIBA spectrometers and spectrographs in applications including Raman spectroscopy, photoluminescence, fluorescence, UV-VIS/NIR spectroscopy, emission spectroscopy, and general optical research. This package includes the Syncerity detector, SDrive-500 shutter controller, power supply, HORIBA software/manual media, installation documentation, and the original factory CCD. HORIBA describes Syncerity as a family of deep-cooled scientific spectroscopy cameras covering UV, visible, near-IR, and VUV configurations.
The Agilent N4906B Serial BERT with Option 012 is a high-speed bit error ratio tester designed for testing digital communications components and systems from 9.5 Gb/s to 12.5 Gb/s. It integrates a pattern generator and error detector for BER testing, receiver sensitivity measurements, high-speed serial link verification, optical transceiver testing, telecom component characterization, and production test. This unit is fully working, operates from 100–240 VAC, 50/60 Hz, and is Serial Number DE45200223. Keysight confirms that Option 012 specifically provides the 9.5–12.5 Gb/s configuration.
The Agilent 86109A is a high-performance optical/electrical sampling module for the Agilent/Keysight 86100-series DCA platform. It provides a 30 GHz amplified optical channel for 1000–1600 nm signals and a 40 GHz electrical channel, making it suitable for high-speed optical communications, eye-diagram analysis, jitter testing, extinction-ratio measurements, transmitter characterization, and photonics R&D. This listing includes an Agilent 86100A Infiniium DCA mainframe free with purchase of the 86109A module.
The Keithley 2502 Dual-Channel Picoammeter is a precision low-current measurement instrument designed for photodiode characterization, optical detector testing, laser-diode production, fiber-optic component testing, and other applications requiring simultaneous two-channel current measurement. It measures current from 1 fA to 20 mA, provides two programmable bias sources up to ±100 V, supports up to 6½-digit resolution, and adds analog outputs for both measurement channels. The instrument also includes GPIB and RS-232 remote control, triggering, sweep capability, limit testing, math functions, and internal reading storage
The Genwac GW-231S is a compact analog color CCD camera designed for machine vision, microscopy, inspection, laboratory imaging, and CCTV applications. It offers manual and automatic white-balance control, electronic shutter adjustment, automatic gain control, backlight compensation, gamma control, auto-iris support, and standard analog video output. The GW-231S is the Genwac-branded equivalent of the Watec WAT-231S platform.
The Edmund Optics TECHSPEC GoldTL #55-348 is a 0.125X focusable telecentric imaging lens designed for precision machine vision, dimensional inspection, and metrology applications. It supports up to a 2/3-inch sensor, provides adjustable focus and iris control, and maintains telecentricity below 0.2° for accurate measurements with minimal perspective error.
The Fujikura FSM-40S is a professional core-alignment optical fiber fusion splicer designed for low-loss splicing of single-mode and multimode fibers. It features automatic fiber alignment, a large color LCD, multiple splice programs, dual-axis fiber viewing, and an integrated splice-protection sleeve heater. The FSM-40S was widely used for telecom, fiber installation, laboratory, and field service applications.
The Ericsson RSU 12 is a professional optical fiber fusion splicer designed for single fibers and ribbon fiber containing up to 12 fibers. It supports single-mode, multimode, DSF, and NZ-DSF fiber and uses fixed V-groove radial alignment with precision motorized axial alignment. The system incorporates a 6.5-inch color display, automatic splice programs, splice-loss estimation, data storage, and a built-in heat oven.
Fujitsu LEIA-DK high-speed digital-to-analog converter development platform featuring four 8-bit DAC channels operating from 55 to 65 GSa/s. Each channel provides 256K × 8-bit waveform memory, with SPI-based programming and high-speed SMPM DAC outputs. Designed for advanced optical communications, coherent transmission, high-speed waveform generation, and R&D applications.
Professional Sumitomo Electric Type-65M12 Micro-Mass fusion splicer for single fibers and ribbon fibers up to 12 counts, featuring automatic fiber positioning, dual-view fiber inspection, splice-loss estimation, built-in sleeve heater, color LCD, and programmable splice modes.
Professional Fujikura FSM-40S core-alignment arc fusion splicer for single-mode, multimode, dispersion-shifted, and specialty optical fibers. Features PAS core alignment, built-in sleeve heater, color LCD fiber viewing, splice-loss estimation, programmable splice modes, and rugged field-oriented construction.
Professional programmable linear DC power supply with three independently adjustable outputs, 158 W total output power, high-resolution programming, and remote-control capability.
Professional Agilent Infiniium DCA wide-bandwidth oscilloscope with an installed 86105B Option 101 optical/electrical measurement module. Provides a 15 GHz optical channel for 1000–1600 nm single-mode measurements and a 20 GHz electrical channel for high-speed digital communications testing.
